Re: [DML] Trailing Arm Bolts - Update
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Trailing Arm Bolts - Update



Marc - I have not yet run across an installation that was 
double-nutted, in all of the cars that I have personally changed the 
TAB's in. Several of the bent bolts were still apparently tight ... 
so it's not the nut backing off that initiated the bending (in those 
cars at least). Other bent bolts were loose as well, and some were 
missing some or all of the shims. I can't give you a firm position on 
the nut issue at this point, as it relates to bent TAB's. Please 
advise on your experiences to date.

Toby Peterson VIN 2248
Winged1 - needs a bath! 

--- In dmcnews@xxxx, "Marc A. Levy" <malevy@xxxx> wrote:
> Toby,
> Were any of the bent bolts you removed double-nutted?









Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated