Shain, Routing information for the parking brake cables can be found in the parts manual diagram 6/2/1. Go to the following link for parking brake adjustment information: http://www.geocities.com/dmcjoe/ParkBrakeAdj.html You should completely remove the drivers seat for easier access to the brake handle cable attachment area. DMC Joe Tech Information, DMC Joe Help Club, & Store "Summer Parts Sale" http://shopping.oraclesmallbusiness.com/dsvstore DeLorean Website Directory www.dmc.tv ----- Original Message ----- From: "shainbrannan" <shain@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Monday, April 15, 2002 8:48 PM Subject: [DML] Parking Brake Cable Replacment Help > Hello, > > I recently rebuilt ym rear calipers and am in the process of > replacing my passenger side rear parking brake line. Can someone > please tell me the proper procedure to to remove and replace the old > one. I have it off at the brake end and am up to where it enters > the car. I have the parking brake handle off the car (the cables > came off earlier). I'm a little puzzled as to where the cable > enters the car and how it hooks up to the handle. Seems like there > is very small amount of room to work there. And also if there is an > adjustment procedure as well for the brake end. I'm also in the > process and replacing all the rear lines with SS ones, think i can > manager that it;s just going to be a little tight, but what isn't on > this car. Runnign out of time until the spring social. > > - Shain > #10140