Andy, Make sure that the multi-pin connectors are clean and that the pins are making good contact. Scott Mueller 002981 -----Original Message----- From: Soma576@xxxx [mailto:Soma576@xxxx] Sent: Monday, April 15, 2002 6:41 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] intermittent signal indicators hey list, i have an extremely annoying problem. lately my instrument cluster turn signal indicators have been on the fritz. seems like every now and then, one of the lights will stop working. all of my exterior lights work but for some reason the indicators will not flash. i have pulled the binnacle off about three times now to check into the problem and it seems like if i take out the bulb holder and then put it back in the light will work again. the bulb holders are in excellent condition and the bulbs have been replaced. i have a new PCB board as of last year and all of my connections seem tight. i even tried bending the tabs on the holders so they would fit tighter but it doesn't seem to do any good. does anyone have any idea on what the problem is and what i can do to fix it? sometimes if i just ignore the light it will come on again in a few hours or couple days. this problem is super-annoying and i'm getting tired of taking my binnacle off!!! please help! Andy Soma576@xxxx 1982 DeLorean DMC-12 VIN#11596 Fargo, ND 58102 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderator@xxxx To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/