Re: [DML] Fan Blower Only #4 works
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Fan Blower Only #4 works



In general I disapprove of just replacing parts blindly. A complaint 
of no #4 fan speed could be caused by too many things from a defective 
fan speed switch to a wire not connected to a missing relay to a burnt 
connecter to the relay. You really have to do a little troubleshooting 
to try to narrow down the source of the problem. I think I would start 
by pulling the #4 speed relay and checking the wiring and if the 
proper voltages are present. You could also jump out the relay with a 
paper clip to verify power and wiring to the fan motor. With a test 
light or a meter you can make sure the fan speed switch is OK. On an 
older car you can never take anything for granted. I just read how 
someone bought a car in an auction and after buying it tried the 
wipers. Not only didn't they work but there was no motor or 
linkage! The wipers were just bolted on!
David Teitelbaum
vin 10757



--- In dmcnews@xxxx, shain@xxxx wrote:
> Jason,
> 
> Not to question DMCJoe, i had a similar problem on my car. The 
ground wires on the relays for the fan speed had burnt very heavly on 
my car, and along with a bad relay i was having a similar problem. 
New wire and a relay (replace the relays is a good idea, the fan speed 
is one of the most used relays in the car)and it works now. 
> 
> - Shain
> #10140
> 
> ----- In Response To -----
> 
> Jason,
> 
> Replace the Fan Speed Resistor Part#101275 (parts manual 7/1/0 fig.) 
our
> price is $26.56.
> 
> Regards,
> DMC Joe/Help Club dmchelp@xxxx
> Information & Store http://shopping.oraclesmallbusiness.com/dsvstore
> DeLorean Website Directory www.dmc.tv
> 770 631-4800
> 
> ----- Original Message -----
> From: "jason3625" <jason@xxxx>
> To: <dmcnews@xxxx>
> Sent: Wednesday, April 03, 2002 3:15 PM
> Subject: [DML] Fan Blower Only #4 works
> 
> 
> > I have been reading some past posts about the internal heater/AC
> > blowers however I did not seem to find some solid answers. It 
seems
> > like my D's blower motor only works on the highest level 1, 2 and 
3
> > do not seem to work and 4 is nothing to scream about. Has any one
> > had any similar problems with a fix? Or maybe where to suggest to
> > look 1st?
> >
> >
> > Thanks
> >
> > Jason
> 
> 
> 
> 
> To address comments privately to the moderating team, please 
address:
> moderator@xxxx
> 
> To search the archives or view files, log in at 
http://groups.yahoo.com/group/dmcnews 
> 
> Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/ 
> 
> 
> 
> 
> 
> -----------------------------------
> WSMMail Brought to you by Adgrafix!
> http://www.adgrafix.com






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated