Re: [DML] Fan Blower Only #4 works
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Fan Blower Only #4 works



Jason, I have attached a small picture of the resistance unit. The total 
ohmage between terminal 1 and 4 is 3 ohms. You can not solder if a wire is 
broken. It gets to hot. It has to be crimped or replaced.
John Hervey
[Unable to display image]

<< I have been reading some past posts about the internal heater/AC 
blowers however I did not seem to find some solid answers. It seems 
like my D's blower motor only works on the highest level 1, 2 and 3 
do not seem to work and 4 is nothing to scream about. Has any one 
had any similar problems with a fix? Or maybe where to suggest to 
look 1st?
>>



[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated