Re: [DML]body bolts (was.... brake runout specs (revisited)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML]body bolts (was.... brake runout specs (revisited)



In a message dated 4/3/02 8:56:09 AM Eastern Standard Time, Whalt@xxxx 
writes:

<< How to you move the air intake piping without removing the rear fascia? My
pontoon isn't simply hollow. It has some kind of air baffle/box in it. >>

Walt,

What I did when having to access that bolt was spin that air baffle/box 
thing out of of the way of the bolt and I was able to remove the bolt. I 
just refused to remove that rear fascia just to get a bolt out. You don't 
need to. With a little finessing anything is possible. Maybe its because I 
have smaller hands than you. But it is possible to rotate that stuff in the 
pontoon out of the way so you can fit either a wrench or a ratchet in there 
to loosen that bolt. Hope that helps.

Later,
Nick Pitello
1852
15914
<A HREF="Http://members.aol.com/njp548";>Http://members.aol.com/njp548</A>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated