Re: [DML] RE: Fiberglass Repair
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] RE: Fiberglass Repair



Marc,
Based on my fiberglass experience
I would recommend making a mold for the shapes you need and pour (make) them off the car. leave some loose fibers on the edges. Then grind the edges of the hole with a v ery coarse sander to free up some fibers.
then put in the new piece with a stringer to hold it in place during initial glue in. After th at has hardened, remove the stringer. and finish the glass work.


Final sand and finish to match.
BOB

Marc A. Levy wrote:

Another one that never made it.. :)

-----Original Message-----
Sent: Monday, March 25, 2002 10:19 AM

Does any one have any links, references, or information on patching the fiberglass body on the DMC?

I have 2 huge holes to fill in, where the previous owner installed intercoolers in the fiberglass body under the rear quarter windows (over the wheel wells).

Thanks

To address comments privately to the moderating team, please address:
moderator@xxxx

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/









Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated