Re: winter brake fluid leakage update

["dmcman82" <srubano@xxxx>]

For your leak....you will want to detrmine where it is coming from. 
Cracked resivoir (I doubt), broken hose going from the resivour, Bad 
master cylinder. Once you have determined exaclty where it is coming 
from then replace/repair. 

As for the epoxy coating...POR-15 is the best solution. I had my 
entire chassis sand blasted of all the old epoxy and I painted my 
entire chassis along with all my suspension parts (including 
springs) and it's amaizing. For your touch up you can get a small 
can of it, a little goes a looooonng way. Scrape all the 
soft/wrinkled epoxy off and use a good degreaserto clean all the 
brake fluid off.

The site where you can get it from is www.por15.com. They are 
located in NJ.

If you have any questions on doing this drop me a line.

Steve