Re: [DML] Auto Tranny governor fix.. justa few more questions!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Auto Tranny governor fix.. justa few more questions!



The clip you are referring to holds the output transistors against the 
metal cover so it can act like a heat sink. In fact you can go to 
Radio Shack and add finned heat sinks onto the outside of the cover 
and use heat sink compound for maximum heat transfer. The caulk is 
just a rubberized sealer to keep moisture out. A small amount of 
silicone sealer will do the same thing. Before you seal it up put it 
together and drive for a while to make sure it is working properly. 
The shift computer seems to act up more when warm so drive on it a few 
days in heat to be sure it really is OK.


--- In dmcnews@xxxx, "Adam Price" <acprice1@xxxx> wrote:
> 
> 
> Thanks to Mark Hershey for all his help so far. I just have
> a few more questions about the governor.
> 
> There is some type of retaining clip? That slides in above
> the boards, is this clip necessary? 

[moderator snip]





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated