unfortunately, any changes to a running poll zero out all entries.... But, y'all heard Toby-- if you've had a loose TAB, feel free to change your vote to a Catastrophic failure. ----- Original Message ----- From: "tmpintnl" <tobyp@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Thursday, February 07, 2002 7:24 PM Subject: [DML] Re: Old Polls > Kevin - Thank you for spearheading some of these poll efforts. On the > TAB poll, replies are still dribbling in, but I was wondering if a > slight tweak to the poll might prove enlightening. The only "failure" > that was not mentioned in the poll was "bolts becoming loose", which > (in my opinion) represents a near-term future failure, and could > perhaps be viewed as a failure in and of itself. Loosening can mean > improper torqueing, but it can also mean bolt stretching and yielding > (which is bad). Just a thought to bring more data to the table. > > BTW - Stay tuned for upcoming information on availability and > ordering for the new "TOBY-TABS". > > Toby Peterson VIN 2248 > Winged1 > > --- In dmcnews@xxxx, "Kevin Creason" <dmc4687@xxxx> wrote: > I've been wondering if I should conclude those polls or just leave > them running forever. Comments? > > > Current polls include: > > > TAB failure* > > > (*=ones that I might close out) > > -Kevin > > #4687 > > > > To address comments privately to the moderating team, please address: > moderator@xxxx > > To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >