Re: [DML] too cool cooling, stuck thermostat?!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] too cool cooling, stuck thermostat?!



As the developer and marketer of this device let me answer your second
question.

You asked:
"....when installing the barb into where the air bleed valve goes, is it
necessary to use some type of anti-cease compound?"

No; the supplied brass fitting dos not require any sealant.

DMC Joe
DeLorean Help dmchelp@xxxx
www.dmc.tv
http://shopping.oraclesmallbusiness.com/dsvstore
----- Original Message -----
From: "Adam Price" <acprice1@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Thursday, January 24, 2002 5:50 AM
Subject: Re: [DML] too cool cooling, stuck thermostat?!


> I have been thinking of instaling the "over heat protector as advertised
on
> some vendor sites and detaled on the DMCnews tech page. I was just
wondering
> what others who have used this think about it. Is it true that once
> installed you never need to air bleed the coolant system again? Also, when
> instaling the barb into where the air bleed valve goes, is it necesary to
> use some type of anti-cease compound?
>
> thanks, Adam
>
>







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated