Re: [DML] Re: White Smoke
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: White Smoke



If the white smoke is coming from the Cat area, check the condition of 
the otterstat seal on the left hand coolant pipe in the boot.
In addition, there is a coolant drain plug and copper seal on the left 
hand side of the engine. This could have come loose, as mine did. You can 
tighten the plug with the same 3/8 drive utilized during oil plug removal for 
oil & filter changes.
Additionally, remember to pressure test your coolant system, and bleed 
ALL air from the coolant system after servicing. 

Best Wishes,
Michael Pack





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated