Re: gear change
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gear change



Paul - The adjustment that you are referring to is very effective at 
shifting the entire pattern over. After I changed my clutch last 
year, (which required removal of all of the shifting linkage), I found 
that I had no reverse. The pattern had been shifted over when I 
reinstalled everything without doing any fine adjustments. I read the 
manual, and performed the adjustment. It allowed me to "fine-tune" 
the exact location of the pattern. Bottom line - go for it.

Toby Peterson VIN 2248
Winged1

--- In dmcnews@xxxx, "Paul Salsbury" <paul.salsbury@xxxx> wrote:
> I have just replaced the Shifter boot on my 5 speed. The new one has 
the metal frame around the bottom as opposed to the plastic one.
> 
> The problem I now have is I have difficulty getting it into reverse, 
as I can't get the gear stick over to the left enough with out pulling 
Sharpe into the side of the plate the boot sits in.
> 
> Looking in the manual at F:07:01 on gear change tube, It sounds like 
this simple adjustment, will move the entire shift pattern towards the 
passenger. Is that all I need to do, as there seems to be plenty of 
space over that side??
> 
> Cheers
> 
> Paul
> #6463







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated