Re: [DML] DML] Re: trailing arm bolt removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] DML] Re: trailing arm bolt removal



> On replacing the left bolt on
> automatics it is not necessary to disconnect the brake line, just the
> trailing arm from the carrier, there is enough slack and you can bend
> the line a little to get the bolt out. Of course if the fluid needs to
> be flushed out it would be a good time to do it.
> David Teitelbaum

Yikes! I thought of doing it that way, but I didn't want to fatigue the
metal lines. Since then, flushing the system made the master cylinder leak,
and now my car is up on jack stands while I slowly rebuild the brake system.

Walt Tampa, FL







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated