[DML] Re: DMC How are the fuel injector suppose to work in this system?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: DMC How are the fuel injector suppose to work in this system?



Sounds like a great project for someone who needs to replace their 
Fuel system. I mean the Fuel distrib is $1000.00+ new, fuel 
injectors are ~$35 a piece (~$210 for all 6), Control presure 
regulator is ~$500.00 new or ~$200 rebuilt. That right there comes 
out to about ~$1710.00 with a new CPR and ~$1410.00 with a rebuilt 
CPR valve.

Steve

--- In dmcnews@xxxx, jwit6@xxxx wrote:
> Andy,
> You could probably do it with all new stuff for about $1600.00, 
but you would 
> have to fabricate the fuel rails, tps mounting and brackets, and 
do the 
> programming/tuning yourself.
> 
> About (these are ball park :-)
> $900.00 for the ECU, AT and ET sensors, 
> $400.00 for new Bosch injectors, 
> $100.00 for MAP sensor and pressure regulator,
> $ 60.00 for TPS
> $ 50.00 for fuel rail fab parts and TPS bracket parts.
> $100.00 in misc like R9 MPI fuel line, clamps, fittings, wire 
looms, cable 
> ties, etc...
> --------------------
> $1610.00 maybe if you do some engineering, the programming, tuning 
and 
> fabrication your self.
> 
> Hope this helps.
> The car and conversion has just been featured on the Racetech web 
site in 
> thier "Projects" section. 
http://www.sdsefi.com/features/nov01del.htm Check 
> the bottom of their home page for other projects. They're at 
www.sdsefi.com 
> You might want to check it out.
> Jim






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated