Throttle sticking - I think
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Throttle sticking - I think



Well I've been trying to pin this one down for a little while. The
situation is that when i drive around for a little while, my throttle
appears to stick and I idle at around 1500 RPM. The throttle spool appears
to return fully, but it's not until I push down on the arm (the one that
trips the idle microswitch) that it drops down to about 900 RPM (where
it's set to idle). I adjusted the screw that trips the microswitch, but
that doesn't seem to be the problem. When idling high, I've taken a dowel
and triped the microswitch without disturbing the arm. No difference. But
then when I press the arm down, the idle drops to 900.

Is there something else that that arm is tripping? Something else that
needs to be adjusted?

Happy Halloween!

-Christian






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated