Re: [DML] Strange Stalling problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Strange Stalling problem



Kevin, Several things could be going on. Gas feed, loss of fuel pump 
connections for a second. Look and see if the connector coming off the 
inertia switch shows and signs of melting.If you may have hit the connector 
with your foot and pulled it loose just enough to barely make contact. Press 
it in good after you take it out and reinstall it. Also, check the wires on 
the ignition coil and the white resistor against the fire wall. When was the 
last time the accumulator was replaced. You can see the connector on the web 
site at http://www.specialtauto.com/elec_main-2.shtml
John hervey
http://www.specialtauto.com/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated