Re: [DML] 3rd Brake Light/Led Lights
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] 3rd Brake Light/Led Lights



Yes, I just mounted the multiple LED type inside the rear window. All that
was necessary was to run a line to ground and another to the green with
purple tracer wire running to the right tail light which can be picked up in
the main connector junction box in the engine compartment. Just be sure that
the polarity of the LEDs are correct because they are a semi-conductor
device. If you use the LED type, the draw is minimal and will not require an
additional relay. If you use an incandescent type, you will probably have to
install the relay due to the additional current load.
Rustproof
Vin 1559






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated