Re: [DML] Striker pin modification (was warped door)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Striker pin modification (was warped door)



In a message dated 10/08/2001 5:41:51 PM Eastern Daylight Time, 
Rustproof@xxxx writes:

<< Subj: [DML] Striker pin modification (was warped door)
Date: 10/08/2001 5:41:51 PM Eastern Daylight Time
From: Rustproof@xxxx (Rustproof)
Reply-to: dmcnews@xxxxxxxxxxxxxxx
To: dmcnews@xxxxxxxxxxxxxxx


Does anyone know the precise difference between a 1981 Striker and an 82? Is
this a modification that could be done on a lathe using the 81 pins? Can an
81 pin be cut to resemble the 82? Mike, you indicated that yours were
chamfered and cut, could you elaborate on this please? Thanks.

The pins are not modified. DO NOT MODIFY THE PIN or TAKE THE PIN OUT.
The area around the pin is modified and updated to the 1982 style. I think is 
was $200 per door.
Mike





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated