Re: [DML] instrument cluster lights - help!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] instrument cluster lights - help!



In a message dated 10/6/01 10:46:32 AM Central Daylight Time, dherv10@xxxx 
writes:


> Andy, Several of the ground wires go to #12 & #13 by the diagram . Black is 
> normally always gnd on the D. I haven't take a binnacle off yet, but I have 
> seen the connector.12 is low beam side gnd and 13 is high beam side gnd. I 
> may pull my binnacle off this weekend. I haven't traced where the grounds 
> connect after the connector.
> 

Hello everyone,

i am stupid. i found the reason why my low beam and right turn signal lights 
wouldn't illuminate. when i removed the tachometer, i replaced the 
paper/foam cushion upsidedown - which blocked viewing of the lights. boy did 
i feel stupid when i realized that!!!!!

Andy

Soma576@xxxx
1982 DeLorean DMC-12 VIN#11596
Fargo, ND 58102


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated