RE: Louvre adjusting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Louvre adjusting



Yes, the louvres are the same height as the roof (at least mine is).

When I took mine off, replacing it caused the same problem. It looks like
the right side is lower than the left. First, grad a friend to give you a
hand... Lift the louvres and loosen the 4 bolts that hold it to the hinges
(just enough so you can be moved when it's lowered). Then, lower it and see
if it can be adjusted enough to fit the way you want it to. If this works,
lift the louvres up slowly and tighten the bolts. 

> Date: Thu, 27 Sep 2001 18:01:30 +0200
> From: wilhelm starberg <wilm@xxxx>
> Subject: Louvre adjusting.
> 
> Hi,
> 
> My louvre is not where it should be.
> It seems like it is a bit to close to the rear bumper, 
> causing, among other
> things, the louvre latch unoperative.
> 
> Here is a picture:
> http://home.c2i.net/wilm/dmclouvre.jpg
> 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated