Re: [DML] buying a delorean for tall person
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] buying a delorean for tall person



[MODERATOR NOTE - I know I killed this thread, but I've never heard of this angle on it before.]

Stock I believe you would find it tight. I am 6'2" and found there was
plenty of head room if I modified the seat slightly. It takes about 1 hour
and most of that is getting the seat out of the car.

The intent is to remove some of the padding from under your buttocks. I cut
out a oval hole in the rubber diaphragm. Then I remove foam from the pad.
I try to remove about an inch of padding and find the seat is much more
comfortable afterwards. "Comfort" is a relative term but I am very
satisfied with the results, and others have commented that they prefer the
feel.

Don Ekhoff

----- Original Message -----
From: <fdld@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Friday, September 07, 2001 11:22 AM
Subject: [DML] buying a delorean for tall person
> I am 6'3", and cannot seem to find any info about height limits for
> drivers. This has been an issue for me before, so I thought I would
> check.
> Thanks for your help





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated