From: Jack The Stripper <motti@xxxx> Reply-To: dmcnews@xxxxxxxxxxxxxxx To: dmcnews@xxxxxxxxxxxxxxx Subject: Re: [DML] Brushed stainless finish Date: Fri, 17 Aug 2001 01:30:49 -0400
This raises an interesting question. Has anyone ever seen a DeLorean that has
had it's entire stainless skin polished to a mirror finish or even heard of any
existing?
Joe
Walter wrote:
> Stian,
>
> I discussed this with one of the foremost guru's of DeLorean fame, Rob
> Grady. For my situation, he suggested starting out with 80 grit sand paper
> and finishing up with a Scotch-brite pad. I did this with excellent
> results. Rob also said that anything finer than 80 grit is more apt to
> polish rather than texture.
>
> >From my trial & error, I have learned the following: The trick is to NOT
> cross the grain at all -- ever. Use long straight lines following the
> grain. It is better to do one narrow band running the length of the panel
> rather than try to touch up just one small spot. When you are done, the
> finished area will be brighter than the rest, but soon it will re-oxidize to
> match everything else.
>
> Walt Tampa, FL
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-- ********************************** "I'll tell you what to think, I don't care what you thought!" --"Mastermind" (Cryptic Writings) by Megadeth (Mustaine) **********************************
Before posting messages or replies, see the posting policy rules at: www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address: moderator@xxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
_________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp