Re: [DML] Re: door handle installation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: door handle installation



Robert,

I have no problems with your advice except for the part about using a
regular socket with a long extension. This just simply didn't work in my
passenger door. There is not a straight enough shot to get a socket on one
of the nuts. I ended up using a crowfoot & swivel which was a real pain.
When I do the driver's door, I'll see if a regular socket will work. If
not, it's back to flopping around in there with a lopsided swivel.

Thanks,
Walt Tampa, FL

----- Original Message -----
From: <DMCVegas@xxxx>
<snip>
> Installation of the door handles is fairly simple. All I used to
> remove the 2 nuts on each handle was a regular socket with a long
> extension. 
<snip>








Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated