Needed: Detailed instructions for fascia adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Needed: Detailed instructions for fascia adjustment



Hi,
I need a detailed instruction for adjusting the fascia towards the LH and RH front fenders. There are a quite noticeable gap between the fascia and fenders. I have seen fascia gaps on several DeLoreans, but I'm sure mine can be adjusted a few more centimetres and align 99% with the rest of the car.

I have looked in the Workshop Manual, but the instructions there are not that good. I would appreciate hints on what to do. I don't want to destroy or break anything, so a detailed instruction would be the best, preferably from someone who have "been there-done that". I would guess that I would have to remove the fascia completely and the re-install it properly. (And no, the car didn't come from the factory this way, I know the previous owner had the fascia apart at some point in time...correcting old mistakes)

Best wishes
Stian Birkeland
Norway

VIN # 06759


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated