Re: [DML] Otterstat retaining clip
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Otterstat retaining clip



Lee,

Be aware that there are two different retaining clips used to secure the coolant temperature switch. See Service Bulletin ST-27-11/81

The original clip part # 108633 was replaced with #110177 as of Vin # 3850.

PS: Your tie wrap suggestion is good and will work in place of the factory issued clip. 

DMC Joe
www.dmc.tv 
"We're here to help you"
DMC Help / De Lorean Services / <dmchelp@xxxx>


----- Original Message ----- 
From: Les Huckins 
To: dmcnews@xxxxxxxxxxxxxxx 
Sent: Saturday, July 21, 2001 6:02 PM
Subject: [DML] The Otterstat


Here's the point, the stock clip is really pathetic,
it has to rust out in time. 






[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated