Re: No Cold Idle - More Details
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: No Cold Idle - More Details



Loosely tighten the three brass screws on the intake. If it won't idle 
on the idle motor there is a problem or adjustment needed in the idle 
system or the control pressure regulater. If it only does this when 
hot it could just be the mixture screw is way out of adjustment or 
there is a vacuum leak you have missed.(Check the plug over the 
mixture screw is there and not leaking).
David Teitelbaum
vin 10757

--- In dmcnews@xxxx, "Jason" <rowejj@xxxx> wrote:
> Heres some more details on my idle problem. 
> 
> All the Vacuum lines seem to be alright. 
> 
> The Frequency valve is buzzing like it should be.
> 
> If I can get the car to stay running long enough to get 
to the engine I can keep it running
> if I pull the throttle lever back a little but If I let off and let 
the throttle lever hit the microswitch it will
> die just a few seconds later. Is this a sign of a bad microswitch? 
I pulled the wires off and cleaned 
> the contacts but it didn't help any. Is there anyway to rebuild 
this? What about the Idle speed 
> regulator? Can that be rebuilt? 
> 
> Thanks for the help......................Jason 
# 5903
> 
> 
> [Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated