Re: Hot start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Hot start problem



You can remove the return hose on the accumulater, plug up at the tee 
and see if fuel is comming out of the accumulater when under pressure. 
If it is then it means that the diaghram is leaking and the acumulater 
is dead. If it doesn't leak then a pressue gauge can confirm that the 
system isn't holding rest pressure probably because of a bad check 
valve at the fuel pump, assuming no leaks.
David Teitelbaum
vin 10757


--- In dmcnews@xxxx, theshovel1224@xxxx wrote:
> List, I don't have this problem yet, knock on wood, but I do have a
> question regarding it. I realize that 95% of hot start problems are
> caused by a faulty fuel accumulator. Another cause is a faulty 
check
> valve in the fuel pump causing the system to lose pressure also. 
The
> other cause is a faulty thermo-time switch causing the cold start
> valve to fire every time the engine is started, flooding a hot 
engine.
> The way to check for this is to unplug the cold start valve when the
> engine is hot, & if it starts up, the problem is a faulty 
thermo-time
> 






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated