Re: [DML] Cold start valve question (it works)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Cold start valve question (it works)



 Just for kicks, I tried disconnecting the cold start valve. It 
does indeed work for hot starting! My car has NEVER started hot 
without using a spray of Ether. I ran the car up to temp, let it sit 
enough to loose pressure, and disconnected the csv, VOILA! It started 
no problems. So evidently, this procedure works.

-Jay


--- In dmcnews@xxxx, njp548@xxxx wrote:
> In a message dated 7/10/01 9:38:41 AM Eastern Daylight Time, 
> iqintermedia@xxxx writes:
> 
> << One thing I have done is disconnect the blue cold
> start valve to prevent the hot start problem >>
> Mike,





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated