RE: [DML] antifreeze question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] antifreeze question



Antifreeze should be mixed to the manufacturer's recommendations
(usually 50/50 for mazimum cold weather protection).
Straight antifreeze does not transfer heat as well as a mixture
of antifreeze and water. Do not use tap water. You should 
used distilled (not spring) water available at any grocery
store. An easy way to measure your mixture is to fill half
of an empty gallon milk jug with distilled water, then 
fill the jug with antifreeze - Presto(ne)! a 50/50 mix.
You now have two half-filled jugs to work with and a gallon
of mixed coolant.

Mike

-----Original Message-----
From: Michael Pike [mailto:iqintermedia@xxxx]

Here is my question - antifreeze says 70/30 mix
maximum...






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated