The only way the bleader screws would be stripped out is by a careless mechanic who bled the system. They sometimes use to much force and when the strip them, they don't bother to replace them (even though they cost only a few dollars). Are your calipers and/or master cylinder bad?? Make sure that there isn't any air in the brake system....it shouldn't cost you $250 to replace bleeder screws and bleed the system. Steve --- In dmcnews@xxxx, orentha@xxxx wrote: > I had my front brake calipers and master cylinder replaced last > summer. And recently I noticed that my brake pedal doesn't have much > pressure and goes all the way to the floor. > So I took it in and had the brakes tested. And the bleeder screws in > the front calipers are completely stripped out.