In a message dated 6/25/01 11:24:04 PM Eastern Daylight Time, BondAtomic@xxxx writes: > The fuel gauge is not quite working right, only reading 1/2 full, and maybe > under that (when the tank gets there.) Would there be a way to fix this > It's usually the fault of the sending unit, not the gauge. When I cleaned my tank and replaced my fuel pump boot and hoses, I noticed a fair amount of black silt inside my sending unit. I rinsed it out with acetone, and the gauge reads just fine now. NOS sending units are, I think, generally unavailable, so the usual replacement is the Tankzilla unit, available from P.J. Grady and some other vendors. Wayne A. Ernst DMCTech Group [Non-text portions of this message have been removed]