We have installed several hundred heavy duty window motor/regulators from DeLorean One, Swedish Automotive, Kapac, DMC Houston, and PJ Grady with absolutely no door denting problems. Virtually all damages related to window motors is caused by improper installation procedures. Keep in mind that there is nothing about the window motor operation that would cause denting of the door panel. DMC Joe www.dmc.tv "We're here to help you" DMC Help / De Lorean Services / <dmchelp@xxxx> DeLorean services.com ----- Original Message ----- From: jtrealty@xxxx To: dmcnews@xxxxxxxxxxxxxxx Sent: Monday, June 18, 2001 10:33 AM Subject: [DML] Re: door dings caused by window regulator If this is as big a problem as you say the simple fix would be to glue a piece of sheet metal (cold rolled or s/s) about 4"x4" to the inside of the door to prevent distortion. David Teitelbaum vin 10757 --- In dmcnews@xxxx, "Walter" <Whalt@xxxx> wrote: > I have the heavy duty window regulator in my passenger door, and I just > confirmed today that it is responsible for putting a dent in the door skin. > I started this thread before suspecting that the dents were only caused by > the OEM window regulators since I have seen several DeLoreans with the same > dents in the doors. > > Anyway, I HEREBY OFFICIALLY COMPLAIN THAT THE HEAVY DUTY REPLACEMENT WINDOW > REGULATORS SOLD BY THE DELOREAN VENDORS HAVE A DESIGN DEFECT ALLOWING THE > TUBE TO PUSH AGAINST AND DENT THE DOOR FROM THE INSIDE. I'm not too [Non-text portions of this message have been removed]