To correct my previous post on this topic: Forget using Liquid Nails to glue the window felt back in. It appeared to work really well on my car, but it eventually came unglued from the black vinyl "u"-shaped rubber piece. The OEM adhesive is barely holding at all on the rest of the piece. Also, I didn't clean the area properly the first time. I'm going to try cleaning it real well with acetone and then using the 3M General Trim Adhesive. Walt Tampa, FL -----Original Message----- From: Walter <whalt@xxxx> <snip> > I glued my >original felt back to the rubber piece using what I had on hand: Liquid >Nails paneling adhesive from Home Depot. That is some good stuff! In this >application it works better than 3M General Trim Adhesive because the Liquid >Nails is thicker and dries with less shrinkage which helps seep into and >stay in the woven backing of the fuzzy stuff. <snip>