In a message dated 6/12/01 9:46:02 AM Eastern Daylight Time, sprins@xxxx writes: << should I put 12V directly on the individual fans and the 12V connection on the waterpump? >> Sacha, What do you mean by putting a 12V connection on the waterpump? It works by turning with the belt from the crank pulley. If you tried tripping the otterstat switch that is on the drivers side cooling line, and the fans still don't go on, then there has to be a problem either at the fans themselves or in the electrical compartment. Maybe you still have that blue relay in there. If you do, you must remove that and put in that "temporary" wire modification to make the fans go on. Later, Nick 1852 <A HREF="Http://members.aol.com/njp548">Http://members.aol.com/njp548</A>