Re: high idle speed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: high idle speed



Check the throttle linkage and be sure when it is at or returning to 
idle that the idle micro switch is clicking. Sometimes it is just on 
the edge or the cable has some slight drag and it doesn't hit the 
switch "smartly". Also check at WOT (wide open throttle) that the 
pedal isn't hitting the floor, the linkage at the pedal bends if the 
cable has too much drag and when it bends you can't get full travel. 
You should have the throttle recall and the cable lubricated with 
anti-freeze! Look in the owner's manual and review starting procedures 
for a cold and a hot engine.
David Teitelbaum
vin 10757




-- In dmcnews@xxxx, "Arne Hofmann (Beta LAYOUT GmbH)" 
<arne.hofmann@xxxx> wrote:
> Hi again,
> all the time I start my D, the engine has high idle
> speed for about 15 seconds, before it comes down
> to the normal ~750rpm. I read in the manual that this
> is o.k. for a cold engine. Unfortunatly my car does this
> also with warm/hot engine.
> Any ideas ?
> 
> Arne

[moderator snip]





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated