Re: [DML] Temperature Gauge sender
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Temperature Gauge sender



I had a problem with my temp guage too. I traced the problem ti the pin connectors in the front righthand side of the engine compartment. the female side of the connector was spred open so it wasn't making contact. If you haven't allready you might want to try that first. It is the lower white plug farthest foreward. Ryan- vin.#16301

From: "George Ryerson" <TRyerson@xxxx>
Reply-To: dmcnews@xxxxxxxxxxxxxxx
To: "DMC Newsgroup" <dmcnews@xxxxxxxxxxxxxxx>
Subject: [DML] Temperature Gauge sender
Date: Wed, 6 Jun 2001 11:15:34 -0400

I've got a situation with my '83 in which the temperature gauge does not work. Because of this, it seems a good idea to check out the temperature sending unit. Unfortunately I've been unable to determine where this device is located.

I'd really





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated