Re: [DML] Delorean galvanized frames
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Delorean galvanized frames



According to Mike Loasby, one of the senior engineers at the factory, they
did trials on a galvanised chassis frame, they liked everything except that
some of the threaded holes needed to be re-tapped out again, because of zinc
build up. This slowed down the production process too much..see his
technical video produced following the 1997 Eurofest.

Chris P DOC UK

----- Original Message -----
From: <CBL302@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, June 04, 2001 5:28 AM
Subject: [DML] Delorean galvanized frames


> Does anybody know why JZD in his infinite wisdom never thought of
> using a galvanized frame such as the Lotus uses(since it is a basic
> copy of a lotus backbone chassis,and if lotus could galvanize their





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated