still clonking
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

still clonking



hello list,

You may remember my post about a clonking noise on the front wheels.
I had a lower ball joint put in and it still clonks.
So I jacked up the wheel drivers side as this is where the sound 
comes from and shook the wheel up and down and side to side It 
would,nt make the sound!
I looked at the bushings and swaybar bushes and although they don't 
look great there does not appear to be any play at all.
With the wheels lowered in there normal state though,If you pull the 
wheels about both sides I can hear a slight clonking the same sound 
when I drive.
Could this be a steering problem?
Bear in mind that the clonking sound only happens when you go over 
bumps in the road,on nice flat roads you can't hear it.

Help please.

Paul UK(where flat roads are few)






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated