Re: [DML] Dash Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Dash Removal



I believe there are six 10mm nuts, four holding the binnacle and two on the
steering column. Remove all of the nuts and give the binnacle a gentle tug.
Now reach in between the dash and binnacle and unplug the speedo and wiring
harness. Use number 168 or PC168 to replace the bulbs. You may want to go
and replace ALL of them now so you don't have to do this again.

Dave Sontos
VIN 02573

----- Original Message -----
From: "Michael Pike" <iqintermedia@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Tuesday, April 24, 2001 12:54 PM
Subject: [DML] Dash Removal
> Does anyone know how to remove the dash so I can get
> to this thing, or is there an easy way to change it?
> And what kind of bulb goes in it?







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated