Re: [DML] door dings caused by window regulator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] door dings caused by window regulator



The cable housing is the part that is causing the dents. The dents are not
very obvious, but on my car, these are the worst dings on both my doors.
When looking straight at the doors, the dents barely obvious; however, when
viewed from standing close to the front or rear of the car and looking down
the side -- particularly at night -- the dents are very obvious. It makes
the familiar 'X' pattern on the hood look lame in comparison.

I'm thinking about installing the optional dealer stripes if only to conceal
the damage.

Walt Tampa, FL

-----Original Message-----
From: Doc <doctor280@xxxx>

>There is only the cable housing and the
>cable,(that runs inside the housing)that is located at the center of the
>door.
>
>Robert Starling
>Vin#05252







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated