Just move patrs from side to side until you eliminate the trouble. You could try 1 injector or 1 hose at a time. It is possible that there is dirt clogging the 3 ports to the injectors on 1 side. If that is the case there are places that can service the Fuel Distributer. It can also be disassembled and cleaned although many do not recommend it. There is a metal gasket that should be replaced or you might have fuel leaks. David Teitelbaum vin 10757 --- In dmcnews@xxxx, "Jerry Harry" <jerryHarry@xxxx> wrote: > Hello List, > Well I'm still trying to get my fuel system repaired and working. > All three of the injectors on the rider side are free flowing, lots of gas. Each will fill a quart jar in just over one minute. > So, three new injectors from DMC Houston! Look good but same problem on all three. This can not be a bad injectors, one maybe, 2 would be a real push but all three bad, doing the same thing as the old ones, not likely. > What goes on inside the fuel distributor? > Why all three on one side and the ones on the other side seem to work correctly. The three on the driver side will inject but I have to depress the air intake to get them to mist very much at all.