Andy, The screws turn CCW to remove. Sometimes you can loosen stubborn screws by placing the correct size screw driver in the screw head, then give the screwdriver handle a solid tap on the end with a dead blow hammer. A dead blow hammer is filled with lead shot so the hammer does not bounce. Be careful, and do not beat the thing to death because of your frustration. When your car is repaired and running again, you may be one of the more knowledgeable owners on the net. Scott Mueller DMCNEWS 002981 DOA 5031 -----Original Message----- From: Soma576@xxxx [mailto:Soma576@xxxx] hey guys, i know this sounds like a really stupid question, but it is in fact quite serious! how the heck do you turn the three mounting screws on the fuel distributer so you can remove it?!?! andy