Count the washers and replace EXACTLY.If the bolts are bent you have to slice them up to remove. Torque the bolts with weight on the suspension otherwise you are preloading the bushings. If automatic loosen left side trailing arm at rear carrier but don't disconnect brake line. David Teitelbaum vin 10757 --- In dmcnews@xxxx, at88mph@xxxx wrote: > This weekend I will be replacing both trailing arm bolts and bushings. I > was wondering if anyone had any tips for this install to make it easier or > things to look out for. I'm planning on taking some pics of the replacement > to add to the tech section. If anyone has any tips or advise to make this > as easy as possible, I would GREATLY appreciate it! :-) > > > Thanks, > > > Duke > '81 DMC w/ Vortec 4.3