Re: [DML] It started easy enough...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] It started easy enough...



In a message dated 4/5/01 8:49:43 PM Central Daylight Time, 
heskin@xxxx writes:


> Does anyone have an alternate method for this simple repair, or am I in
> need of a new tool (pop riveter)? Everything else in the car seems easy to
> disassemble, except this. Help.
> 
> Thanks much,
> 
> 

Hello Hank,

you are not alone. i did this repair while i was in my doors this winter, and 
yes, you will have to drill out the rivets. it's pretty straightforward 
after that. you may be able to find some small bolts and nuts that will go 
where the rivets were. i just used a pop rivet gun to put some new ones in 
there. you are on the right track, you just have to go for it and maybe be 
creative!

as for the window switch, call the vendors (esp. PJ Grady and DMCJoe) - they 
have some used parts on hand and maybe they can help out! btw - how did you 
manage to destroy the switch? 

Andy

Soma576@xxxx
1982 DeLorean DMC-12 VIN#11596
Fargo, ND 58102


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated