Re: [DML] ECU
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] ECU



Jerry, You should have 12 + volts on the wire or that side of the relay. If you have the diagram D:04:12, it comes thru #7 fuse directly to the contacts. You may have a burnt contact and it's not conducting properly due to high resistance. You can see the diagram on my web site. The Lambda processes the voltage from the 02 sensor as it reads the mixture to adjust the FV. It's rare that a Lambda unit doesn't work. Most of the the time the 02 sensor is contimanited and doesn't respond to the mixture and FV won't change and just runs rich or lean. Call or email if you need any more help.
John hervey
www.specialtauto.com 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated