Re: [DML] Door Solenoids
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Door Solenoids



Robert,

>From our experience lock solenoids that are rewound using a non factory
process have an extremely high failure rate.

DMC Joe

"We're here to help you"

DMC Help / De Lorean Services / <dmchelp@xxxx>
Web Site: <www.deloreanservices.com>

----- Original Message -----
From: <DMCVegas@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Thursday, March 15, 2001 5:13 PM
Subject: [DML] Door Solenoids


> Can anyone here tell me if it is a difficult job to rewind the dooor
> solenoids? According to the Technical Library, each solenoid takes
> 70' of #20 enameled motor wire. Since chances are that I'll need to
> replace the passenger side solenoid, I was looking at this fix as a
> possible alternative.
>
> -Robert
> vin 6585







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated