Re: [DML] Door alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Door alignment



The answer is NO. You MUST remove the torsion bar to remove a door. Be 
very careful working around the torsion bar, see the archives and old 
posts on the subject. It also isn't worth the work re-aligning the 
door after removing. Get a string and tie the door part-way closed as 
you sit on the door sill. Tape all sharp edges inside or you will get 
sliced up.
David Teitelbaum
vin 10757



-- In dmcnews@xxxx, mrvideosawyer@xxxx wrote:
> Group,
> 
> Can doors be removed without taking out torsion bars?? The insides 
would be easier to work on when on the bench.
> 
> Jim
> Vin4149 "ELMO"
> __________________________________________________________________
> Get your own FREE, personal Netscape Webmail account today at 
http://webmail.netscape.com/






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated