Re: [DML] Lift it up question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Lift it up question



Les,

If you mean the ramps like in the link below, yes they will work. I had
mine on them during the engine swap. Make sure you do the front first and
jack the front up evenly (one person on each side w/ a jack) so that you
don't put undo stress on the frame. When you get ready to jack up the
rear, make sure you place the jack directly in the center of the crossmember
(use a block of wood there as well) and just jack it up slowly while someone
watches the front (just to be safe)

http://www.geocities.com/at88mph_1999/easier.jpg

Hope this helps,


Duke

----- Original Message -----
From: Les Huckins <jhuckins@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, March 05, 2001 12:08 PM
Subject: [DML] Lift it up question


>my question is when I get it up in the air can I use
> the little ramps you get at car parts stores to slip under the wheels?
>
> Thanks, Les







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated