I just talked to a friend in the firearms industry about WD-40. Turns out he made the same mistake years ago with a whole case of expensive military shells and guns. Upon investigation he found out that what it really does is displace water that is on the surface and moves it along in its wicking path. In the case of guns and ammo it will move the water along to some crevasse inside (like a primer cap or trigger mechanism) and then bridge the water with an oily film. That will cause corrosion and primers to fail. Don't know how much this is true, but it makes an element of sense. I personally use Prolon's spray and am sold on it. I pulled the Patent on it a few years ago and seems it is based on a chemistry that was known in the 20's but was too corrosive to handle. What the Prolon guys did was to stabilize it. They excelled to the extent that it is now an excellent corrosion inhibitor. I believe silicone sprays have their place as well. Donald L. Ekhoff (Several s/n's) ----- Original Message ----- From: "William T Wilson" <fluffy@xxxx> To: <dmcnews@xxxxxxxxxxxxxxx> Sent: Monday, February 05, 2001 12:31 PM Subject: Re: [DML] WD-40 the other side > On Sun, 4 Feb 2001, Les Huckins wrote: > > > anecdote, I hope it's permissible, I have a friend who's a cop, he > > used WD-40 to oil his police special, decided to do the bullets > > I'd like to mention that WD-40 isn't really an oil. It's a decent > penetrant, but after it's been out of the can for a while, the light > components evaporate, and it turns into a sort of sticky goo. This is why > if you oil a squeaky door or something with WD-40 after a while it will be > back worse than before. > > The only thing I ever use WD-40 for any more is unsticking stuck stuff, > and even then, I prefer Liquid Wrench. > > > > Before posting messages or replies, see the posting policy rules at: > www.dmcnews.com/Admin/rules.html > > To address comments privately to the moderating team, please address: > moderator@xxxx >